Sale!
Kenny Hill Player Classical Guitar - Cedar 650mm with PORTS
Kenny Hill Player Classical Guitar - Cedar 650mm with PORTS
Kenny Hill Player Classical Guitar - 650mm
Kenny Hill Player Classical Guitar - 650mm
Kenny Hill Player Classical Guitar - Cedar 650mm with PORTS

Kenny Hill Player Classical Guitar – 650mm

$1,695.00 $1,525.00

This is a beautiful all solid wood guitar built to exacting specifications by Kenny Hill
Cedar or Spruce Top w/ HSC Including Shipping/Insurance

Clear
kenny_hill_player_cedar_650_1

Kenny Hill Classical Guitar Player Series – 650mm

The Kenny Hill Player Classical Guitar Series are new models that have been in development for some time. At a more accessible price, these guitar feature selected Indian rosewood, cedar, spruce and cypress: all solid woods, and a thinly applied lacquer finish.

The Player Series Classical Guitar offers the player a wide variety of choices: each model is available with an Engelmann Spruce or Western Red Cedar soundboard, 650mm or shorter 640mm string lengths and lower. Incredibly, the Spruce tops have silk rays or medullar rays throughout, highly prized and they really do sound terrific. The Cedar tops have beautiful straight grain, with a lush ruddy look to them, sounding warm and wet, most evidencing the same Medullar Rays. The Indian Rosewood backs and sides are also superior. You might expect to see these types of woods selected for guitars well over $3000 or more in price.

Kenny Hill Player Classical Guitar – 650mm Specs

Once you’ve tried these classical guitars, I am confident you will agree that once again, Kenny Hill has delivered a remarkable line of finely-crafted instruments; they look great, are a joy to play and sound terrific.

  • Solid Wood Soundboard available in Western Red Cedar or Engelmann Spruce (beautiful selections by Kenny)
  • Scale Lengths: Available in 650mm – 640mm – 628mm – 615mm (The 628mm is smaller bodied than the 650 and the 640, and then the 615mm is also smaller bodied than the 628mm scale length guitar, as well)
  • 640 mm – 628mm and 615mm Scale Lengths are well suited to those with smaller hands – see discussion below
  • There is also a Finger-style Cutaway model available for $100 additional with the same Hill Hard Shell Case
  • Any of the available guitars are also available to left handed players ($100 additional cost)
  • Bone nut & saddle
  • Sound board: Available in Spruce or Cedar (solid woods)
  • Back & sides: East Indian Rosewood (solid woods) – again, Kenny chooses the finest woods for all of his guitars.
  • Fingerboard: Ebony
  • Guitar is fitted with a dual action truss rod (all Hill Guitars, from his Signature Model down, including Estudio Models, have the same).
  • Finish: Lacquer gloss, thinly applied
  • String Spacing: 51mm nut width – 58mm string spacing at bridge
  • Retail Price is $1695- Look for my Discounted Price in your Shopping Cart when you ADD to Cart
kenny_hill_player_spruce_650_1

Kenny Hill Classical Guitar Player Series – 650mm

Players with shorter hands and/or fingers should seriously consider the 640mm  scale.

My fitting sessions with numerous players over the years has proven that this slightly smaller scale is simply more comfortable for the majority of players, while sacrificing nothing in terms of tone and volume. The difference is the length of the neck, the width of the nut at 48-51mm and the proportional fretting of the instrument.

The 650mm is suitable for those players whose spread between thumb and pinky is 9″ or greater.

You can also measure your pinky tip to index finger tip spread comfortably.  You should be at 6.5″-7″ on this measurement – you would adjust 1″ less for each scale length lower.

The 640mm is suitable for those players whose spread between thumb and pinky is 8″-9″

The 628mm is best for players with a span of 7″-8″

The 615mm scale length is best for players with a span of 7″ or less to about 6″

Of course, these are generalizations, but I do find that most players fit these standards.

Kenny Hill Player Classical Guitar – 650mm

Features

Model Kenny Hill Player Classical Guitar – 650mm
Condition New
Scale 650 mm
Finish Fine Lacquer
Tuners Midline Gotoh machines with either Ivory or Ebony Buttons
Case Hill Guitar HSC – Brown Tolex – Red Velvet interior

Tone Woods

Top Western Red Cedar or Engelmann Spruce tops – all solid
Sides/Back East Indian Rosewood  – all solid
Neck Spanish Cedar with lightweight truss rod (all Hill Guitars have a truss rod)
Bridge East Indian Rosewood
Bracing 7 Fan Bracing
Fingerboard Ebony
Ports Yes

Measurements

Nut Width 51mm
String Spacing 43mm – 51mm – 60mm (nut – 12th – bridge)
Overall length 38 5/8″
Body length 19 “
Upper bout width 10 7/8″
Waist width 9 1/4″
Lower bout width 14 1/2″
Body depth 3 1/2″ & 3 7/8″
Guitar Weight 3lbs. & 8 oz.

___________

Media

Listening with high quality headphones or audio equipment is highly recommended including EQ manipulation, if possible. We record everything flat with just a touch of Reverb to relieve dryness. My goal is to record the guitar as realistically as is possible. I speak in the recordings, my thoughts about the guitar (and possibly other things?).  My speaking also serves to give you my first impressions and to also give you a balance of the engineering (or lack thereof) versus the sound of the guitar.  I simply do not have time to engineer much of anything.  Thanks. Rich

Please NOTE that photos of all “production guitars” are stock photos, taken randomly for our numerous selection of guitars, whether they be from Kenny Hill – Esteve – Adalid or others.  It is virtually impossible and arduous to photograph each of our available production guitars.  I am, however, happy to take a few photos for you of any particular guitar with which your are interested.

Handcrafted instruments are photographed and listed individually, usually identified by a serial number, date and or some other combination.

MP3 Audio

Hill Player Classical Guitar 650 Spruce – A Father Remembers by Richard F. Sayage – The music is available here

Hill Player Classical Guitar 650 Cedar – hill_player_650C_valsair  – Valerie’s Air by Richard F. Sayage – The music is available here

___________

kenny_hill_player_cedar_650_2

Kenny Hill Classical Guitar Player Series – 650mm

Shipping:

Premium Hard Shell Case (HSC) is included in your purchase price.
Insured FedEx Ground, USPS Ground or USPS Priority/Express Shipping is included to the 50 US
Anywhere else is subject to the most recent quote from USPS
Please write to me for a detailed quote for International Shipping.
Packaging is professionally done within its hard-shell case.
It is always preferred that you come to the Studio to play it and pick it up.
Rich

Warranty:

This guitar carries a 1 Year Warranty to the original owner against material or workmanship defects

Please read my Return Policy

Please inquire using email or phone (Contact Me)

Email me directly if you need more info: [email protected]

Additional information

Weight 20 lbs
Dimensions 45 × 18 × 8 in
Tone Wood

,